SuperFast Bearings

Product Specifications

SuperFast  bearings are a ceramic ball bearing with chrome steel retainers. Perfect for the racer looking for more speed and has a ton of value for the dollar. It does require some maintenance as it uses one metal shield and one rubber seal.

ABEC/ISO RATING: ABEC#1/ISOP0

BALL GRADE: 10

BALL MATERIAL: CERAMIC SI3N4

BEARING MATERIAL: CHROME STEEL 52100

DIMENSION TYPE: METRIC

ENCLOSURE TYPE: REMOVABLE (S)

ENCLOSURE NO: ONE SEAL/ONE SHIELD

LUBE: KYODO SRL GREASE

ENCLOSURE MATERIAL:SHIELD/SEAL

RETAINER MATERIAL: CHROME STEEL

BASIC LOAD (KGF): 44

DYNAMIC LOAD (KGF): 87

WORKING TEMP DEG. C: 121

RPM GREASE (X1000): 17.50

RPM OIL (X1000): 20.00

CrazyFast Bearings

Product Specifications

   

CrazyFast bearings, are specially designed for relatively clean operating environments. These bearings have ceramic balls, with stainless steel races, retainers and shields. CrazyFast hybrids are lighter, capable of achieving higher RPM's. Bearings have light oil for lubrication. 

  

ABEC/ISO RATING: ABEC#1/ISOP0

BALL DIAMETER: 1.588

BALL GRADE: 10

BALL MATERIAL: CERAMIC SI3N4

BEARING MATERIAL: STAINLESS STEEL 440C

ENCLOSURE TYPE: REMOVABLE

ENCLOSURE NO: TWO SHIELDS

LUBE: SHELL AF2 OIL

ENCLOSURE MATERIAL: YZ STAINLESS STEEL

NUMBER OF BALLS: 11

RETAINER MATERIAL: STAINLESS STEEL

BASIC LOAD (KGF): 44

DYNAMIC LOAD (KGF): 87

WORKING TEMP DEG. C: 121

RPM OIL (X1000): 25.50

UltraFast Bearings

Product Specifications

 This is a Great Bearing for keeping the dirt/dust out! Recommended for any exposed areas such as wheel and drive line bearings. They come packed with grease and you do not need to worry about maintenance. If you want a little less friction you can pop the seals off clean and lube with our Fast bearing lube.  

UltraFast  bearings are recommend for more extreme dirty conditions as it is sealed by two rubber contact seals. No maintenance required with this series. Perfect for wheel bearings and any bearing exposed to elements.


ABEC/ISO RATING: ABEC#1/ISOP0

BALL GRADE: 10

BALL MATERIAL: CERAMIC SI3N4

BEARING MATERIAL: STAINLESS STEEL 440C

DIMENSION TYPE: METRIC

ENCLOSURE TYPE: CONTACT SEAL

ENCLOSURE NO.: TWO SEALS

LUBE: KLUBER NBU12/300KP

ENCLOSURE MATERIAL: YS RUBBER SEAL

RETAINER MATERIAL: STAINLESS STEEL

BASIC LOAD (KGF): 45

DYNAMIC LOAD (KGF): 110

WORKING TEMP DEG. C: 121

RPM GREASE (X1000): 54.00

RPM OIL (X1000): 67.00

HyperFast Bearings

Product Specifications

 

For the serious stock class racer looking for the Fastest bearings possible! 

We have tested a lot of bearings and found these to be the best for transmission bearings. Check out the video section to see.

They are lube free and recommended to run them this way because the non-contact seals will allow oil to seep and collect dust/dirt. Simply blow them out after race day.

HyperFast bearings are THE HIGHEST QUALITY and FASTEST bearing available. This bearing series is for the racer looking for the best product available. Bearing has non-contact seals so maintenance is required.

ABEC/ISO RATING: ABEC#7/ISOP4

BALL GRADE: 5

BALL MATERIAL: CERAMIC SI3N4

BEARING MATERIAL: STAINLESS STEEL 440C

DIMENSION TYPE: METRIC

ENCLOSURE TYPE: NON CONTACT SEAL

ENCLOSURE NO.: TWO SEALS

LUBE: LD DRY LUBE

ENCLOSURE MATERIAL: RUBBER SEAL

RETAINER MATERIAL: STAINLESS STEEL

WORKING TEMP DEG. C: 121